日韩一区二区中文字幕_成人精品影视_日韩精品视频中文字幕_亚洲精品在线电影

IEC 60041 Corrigendum 1-1996

測定水輪機、蓄能泵和水泵-水輪機水力性能的現場驗收試驗

Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines

IEC 60041-1991

測定水輪機、蓄能泵和水泵-水輪機水力性能的現場驗收試驗

Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines

IEC 60193-1999

水輪機、蓄能泵和水泵水輪機 模型驗收試驗

Hydraulic turbines, storage pumps and pump-turbines - Model acceptance tests

IEC 60335-2-40 AMD 1-2006

家用和類似用途電器.安全.第2-40部分:電動熱泵、空調器和去濕器的特殊要求.修改件1

Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air conditioners and dehumidifiers; Amendment 1

IEC 60335-2-40 AMD 2-2006

家用和類似用途電器.安全.第2-40部分:電動熱泵、空調器和去濕器的特殊要求.修改件2

Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers; Amendment 2

IEC 60335-2-40 Edition 4.2-2006

家用和類似用途電器.安全.第2-40部分:電動熱泵、空調器和去濕器的特殊要求

Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air conditioners and dehumidifiers

IEC 60335-2-40-2002

家用和類似用途電器的安全.第2-40部分:電動熱泵、空調器和去濕器的特殊要求

Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air conditioners and dehumidifiers

IEC 60335-2-41 AMD 1-2005

修改件1.家用和類似用途電器.安全.第2-41部分:泵的特殊要求

Amendment 1 - Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps

IEC 60335-2-41 Edition 3.1-2005

家用和類似用途電器.安全.第2-41部分:泵的特殊要求

Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps

IEC 60335-2-41-2002

家用和類似用途電器的安全.第2-41部分:泵的特殊要求

Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps

IEC 60335-2-51-2005

家用和類似用途電器.安全.第2-51部分:加熱和供水設施用固定式循環泵的特殊要求

Household and similar electrical appliances - Safety - Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations

IEC 60601-2-24-1998

醫用電氣設備 第2-24部分:輸液泵及其控制器的安全專用要求

Medical electrical equipment - Part 2-24: Particular requirements for the safety of infusion pumps and controllers

IEC 60609-1-2004

水輪機、蓄能泵和水泵水輪機.氣蝕損壞的評定.第1部分:反擊式水輪機、蓄能泵和水泵水輪機的評定

Hydraulic turbines, storage pumps and pump-turbines - Cavitation pitting evaluation - Part 1: Evaluation in reaction turbines, storage pumps and pump-turbines

IEC 60609-2-1997

水輪機、蓄能泵和水泵水輪機氣蝕損壞的評定 第2部分:水斗式水輪機的評定

Cavitation pitting evaluation in hydraulic turbines, storage pumps and pump-turbines - Part 2: Evaluation in Pelton turbines

IEC 60805-1985

蓄能泵和作為水泵運行的水泵水輪機的調試、運行和維護指南

Guide for commissioning, operation and maintenance of storage pumps and of pump-turbines operating as pumps

IEC 60994 Corrigendum 1-1997

水力機械(水輪機、蓄能泵和水泵水輪機)振動與脈動現場測量指南

Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storage pumps and pump-turbines)

IEC 60994-1991

水力機械(水輪機、蓄能泵和水泵水輪機)振動與脈動現場測量指南

Guide for field measurement of vibrations and pulsations in hydraulic machines (turbines, storage pumps and pump-turbines)

IEC 61290-6-1-1998

光學纖維放大器 基礎規范 第6-1部分:泵浦泄漏參數的測量方法 光解復用器

Optical fibre amplifiers - Basic specification - Part 6-1: Test methods for pump leakage parameters - Optical demultiplexer

IEC 61702-1995

直接耦合光伏水泵系統的額定值

Rating of direct coupled photovoltaic (PV) pumping systems

IEC/TR3 61366-1-1998

水輪機、蓄能泵和水泵水輪機 投標文件 第1部分:總則和附錄

Hydraulic turbines, storage pumps and pump-turbines - Tendering documents - Part 1: General and annexes

IEC/TR3 61366-2-1998

水輪機、蓄能泵和水泵水輪機 投標文件 第2部分:軸向輻流式水輪機技術規范指南

Hydraulic turbines, storage pumps and pump-turbines - Tendering documents - Part 2: Guidelines for technical specifications for Francis turbines

IEC/TR3 61366-3-1998

水輪機、蓄能泵和水泵水輪機 投標文件 第3部分:水斗式水輪機的技術規范指南

Hydraulic turbines, storage pumps and pump-turbines - Tendering documents - Part 3: Guidelines for technical specifications for Pelton turbines

IEC/TR3 61366-4-1998

水輪機、蓄能泵和水泵水輪機 投標文件 第4部分:轉漿式和定漿式水輪機的技術規范指南

Hydraulic turbines, storage pumps and pump-turbines - Tendering documents - Part 4: Guidelines for technical specifications for Kaplan and propeller turbines

IEC/TR3 61366-5-1998

水輪機、蓄能泵和水泵水輪機 投標文件 第5部分:貫流式水輪機的技術規范指南

Hydraulic turbines, storage pumps and pump-turbines - Tendering documents - Part 5: Guidelines for technical specifications for tubular turbines

IEC/TR3 61366-6-1998

水輪機、蓄能泵和水泵水輪機 投標文件 第6部分:水泵水輪機的技術規范指南

Hydraulic turbines, storage pumps and pump-turbines - Tendering documents - Part 6: Guidelines for technical specifications for pump-turbines

IEC/TR3 61366-7-1998

水輪機、蓄能泵和水泵水輪機 投標文件 第7部分:蓄能泵的技術規范指南

Hydraulic turbines, storage pumps and pump-turbines - Tendering documents - Part 7: Guidelines for technical specifications for storage pumps

IEC/TS 62091-2003

低壓開關設備和控制設備.固定式消防泵的驅動器用控制器

Low-voltage switchgear and controlgear - Controllers for drivers of stationary fire pumps

ISO 10767-1-1996

液壓傳動 系統和元件產生壓力波動值的測定 第1部分:用于泵的精密方法

Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Part 1: Precision method for pumps

ISO 10767-2-1999

液壓傳動 系統和元件產生壓力波動值的測定 第2部分:用于泵的簡化方法

Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Part 2: Simplified method for pumps

ISO 10816-5-2000

機械振動 在非旋轉部件上測量和評定機器振動 第5部分:水力發電廠和泵站機組

Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 5: Machine sets in hydraulic power generating and pumping plants

ISO 12334-2000

航空航天 帶壓力補償的變流量液壓泵 35000 kPa系統的一般要求

Aerospace - Hydraulic, pressure-compensated, variable delivery pumps - General requirements for 35000 kPa systems

ISO 13253-1995

管道式空調器和氣-氣加熱泵 性能的檢測和額定功率

Ducted air-conditioners and air-to-air heat pumps - Testing and rating for performance

ISO 13256-1-1998

水源熱泵 性能試驗和額定功率 第1部分:水-氣和鹽水-氣熱泵

Water-source heat pumps - Testing and rating for performance - Part 1: Water-to-air and brine-to-air heat pumps

ISO 13256-2-1998

水源熱泵 性能試驗和額定功率 第2部分:水-水和鹽水-水熱泵

Water-source heat pumps - Testing and rating for performance - Part 2: Water-to-water and brine-to-water heat pumps

ISO 13261-1-1998

空調和空氣源熱泵設備的聲功率額定值 第1部分:無室外管道設備

Sound power rating of air-conditioning and air-source heat pump equipment - Part 1: Non-ducted outdoor equipment

ISO 13261-2-1998

空調和空氣源熱泵設備的聲功率額定值 第2部分:無室內管道設備

Sound power rating of air-conditioning and air-source heat pump equipment - Part 2: Non-ducted indoor equipment

ISO 13457-2000

農業灌溉設備 水驅動的化學制劑噴射泵

Agricultural irrigation equipment - Water-driven chemical injector pumps

ISO 13709-2003

石油、石油化工和天然氣工業用離心泵

Centrifugal pumps for petroleum, petrochemical and natural gas industries

ISO 13710-2004

石油、石油化學和天然氣工業.往復式變容真空泵

Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps

ISO 13948-1-2000

柴油機 燃料噴射泵和燃料噴射器低壓連接 第1部分:螺紋連接件

Diesel engines - Fuel injection pumps and fuel injector low-pressure connections - Part 1: Threaded connections

ISO 13948-2-2000

柴油機 燃料噴射泵和燃料噴射器低壓連接 第2部分:無螺紋(推進式)連接件

Diesel engines - Fuel injection pumps and fuel injector low-pressure connections - Part 2: Non-threaded (push-on) connections

ISO 14617-9-2002

圖表用圖形符號.第9部分:泵、壓縮機和風扇

Grahical symbols for diagrams - Part 9: Pumps, compressors and fans

ISO 14681-1998

柴油機 燃料噴射泵試驗 燃料噴射器的校正

Diesel engines - Fuel injection pump testing - Calibration fuel injectors

ISO 14847-1999

回轉容積泵 技術要求

Rotary positive displacement pumps - Technical requirements

ISO 15083-2003

小艇.艙底泵吸系統

Small craft - Bilge-pumping systems

ISO 15136-1-2001

石油和天然氣工業用下降孔設備 人工升降機用推進腔體泵系統 第1部分：泵

Downhole equipment for petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps

ISO 15136-2-2006

石油和天然氣工業.人工升降機用推進腔體泵系統.第2部分:表面傳動系統

Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 2: Surface-drive systems

ISO 15783-2002

無密封旋轉動力泵.2級.規范

Seal-less rotodynamic pumps - Class II - Specification

ISO 16017-1-2000

室內、環境和工作場所空氣 用吸附管/熱解吸/毛細管氣相色譜法作揮發性有機化合物的取樣及分析 第1部分:泵唧

Indoor, ambiant and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 1: Pumped sampling

ISO 1607-1-1993

容積真空泵 性能測量方法 第1部分:體積流速(抽速)的測量

Positive-displacement vacuum pumps; measurement of performance characteristics; part 1: measurement of volume rate of flow (pumping speed)

ISO 1607-2-1989

容積真空泵 性能測量方法 第2部分:極限壓力的測量

Positive-displacement vacuum pumps; measurement of performance characteristics; part 2: measurement of ultimate pressure

ISO 1608-1-1993

蒸氣真空泵 性能特性的測量 第1部分:體積流速(抽速)的測量

Vapour vacuum pumps; measurement of performance characteristics; part 1: measurement of volume rate of flow (pumping speed)

ISO 1608-2-1989

蒸氣真空泵 性能特性的測量 第2部分:臨界前級壓力的測量

Vapour vacuum pumps; measurement of performance characteristics; part 2: measurement of critical backing pressure

ISO 16200-1-2001

工作場所空氣質量 采用溶劑解吸作用/氣相色譜法對揮發性有機化合物取樣和分析 第1部分：泵激取樣法

Workplace air quality - Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography - Part 1: Pumped sampling method

ISO 16330-2003

往復式變容真空泵和泵裝置.技術要求

Reciprocating positive displacement pumps and pump units - Technical requirements

ISO 16902-1-2003

液壓傳動.用聲強法測定聲功率級的試驗規程:工程法.第1部分:泵

Hydraulic fluid power - Test code for the determination of sound power levels using sound intensity techniques: Engineering method - Part 1: Pumps

ISO 17559-2003

液壓流體動力.電控液壓泵.性能特征測定的試驗方法

Hydraulic fluid power - Electrically controlled hydraulic pumps - Test methods to determine performance characteristics

ISO 17613-1-2006

飲用水人工操作泵.選擇和驗收.第1部分:東南亞

Manually operated pumps for drinking water - Selection and acceptance - Part 1: Southeast Asia

ISO 20763-2004

石油和相關產品.液壓液耐磨性的測定.葉輪泵法

Petroleum and related products - Determination of anti-wear properties of hydraulic fluids - Vane pump method

ISO 21049-2004

泵.離心和旋轉泵用軸密封系統

Pumps - Shaft sealing systems for centrifugal and rotary pumps

ISO 2151-2004

聲學.壓縮機和真空泵的噪聲試驗規范.工程方法(2級)

Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (Grade 2)

ISO 21573-1-2006

建筑施工機械和設備.混凝土泵.第1部分:技術和工業規范

Building construction machinery and equipment - Concrete pumps - Part 1: Terminology and commercial specifications

ISO 24490-2005

低溫容器.低溫設備用泵

Cryogenic vessels - Pumps for cryogenic service

ISO 2714-1980

液態烴 用容積置換儀表系統而非分配泵系統測量體積

Liquid hydrocarbons; Volumetric measurement by displacement meter systems other than dispensing pumps

ISO 2858-1975

端吸離心泵(額定壓強 16 bar) 標記、性能和尺寸

End-suction centrifugal pumps (rating 16 bar); Designation, nominal duty point and dimensions

ISO 3019-1-2001

液壓傳動 活塞泵和馬達的安裝法蘭和軸端的尺寸和標識碼 第1部分：用米制單位表示的英制系列

Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors - Part 1: Inch series shown in metric units

ISO 3019-2-2001

液壓傳動 活塞泵和馬達的安裝法蘭和軸端的尺寸和標識碼 第2部分：米制系列

Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors - Part 2: Metric series

ISO 3069-2000

端吸離心泵 機械密封和軟填料密封腔的尺寸

End-suction centrifugal pumps - Dimensions of cavities for mechanical seals and for soft packing

ISO 3529-2-1981

真空技術 詞匯 第2部分:真空泵和有關術語 三種語言版

Vacuum technology; Vocabulary; Part 2 : Vacuum pumps and related terms Trilingual edition

ISO 3661-1977

端吸離心泵 底座尺寸和安裝尺寸

End-suction centrifugal pumps; Baseplate and installation dimensions

ISO 3662-1976

液壓傳動 泵和馬達 幾何排量

Hydraulic fluid power; Pumps and motors; Geometric displacements

ISO 4008-1-1980

道路車輛 噴油泵試驗 第1部分:動態條件

Road vehicles; Fuel injection pump testing; Part 1 : Dynamic conditions

ISO 4008-2-1983

道路車輛 噴油泵試驗 第2部分:靜態條件

Road vehicles; Fuel injection pump testing; Part 2 : Static conditions

ISO 4008-3 AMD 1-2002

道路車輛.噴油泵試驗.第3部分:應用和試驗程序.修改1

Road vehicles - Fuel injection pump testing - Part 3: Application and test procedures; Amendment 1

ISO 4008-3-1987

道路車輛 噴油泵試驗 第3部分:應用和試驗程序

Road vehicles; Fuel injection pump testing; Part 3 : Application and test procedures

ISO 4093-1999

柴油機 噴油泵 試驗臺用高壓油管

Diesel engines - Fuel injection pumps - High-pressure pipes for testing

ISO 4113-1988

道路車輛 柴油機噴油泵的校泵油

Road vehicles; calibration fluid for diesel injection equipment

ISO 4391-1983

液壓傳動 泵、馬達和整體式傳動裝置 參數定義和字母符號

Hydraulic fluid power; Pumps, motors and integral transmissions; Parameter definitions and letter symbols

ISO 4409-1986

液壓傳動 容積式泵、馬達和整體式傳動裝置 穩態性能測定

Hydraulic fluid power; Positive displacement pumps, motors and integral transmissions; Determination of steady-state performance

ISO 4412-1-1991

液壓傳動 空氣噪聲級測定的試驗規范 第1部分:泵

Hydraulic fluid power; test code for determination of airborne noise levels; part 1: pumps

ISO 4412-3-1991

液壓傳動 空氣噪聲級測定的試驗規范 第3部分:泵 采用平行六面體傳聲器陣列的方法

Hydraulic fluid power; test code for determination of airborne noise levels; part 3: pumps; method using a parallelepiped microphone array

ISO 5151-1994

無輸入空調器和熱泵 性能參數試驗

Non-ducted air conditioners and heat pumps - Testing and rating for performance

ISO 5198-1987

離心泵、混流泵和軸流泵 液壓性能試驗規范 精密級

Centrifugal, mixed flow and axial pumps; Code for hydraulic performance tests; Precision grade

ISO 5199-2002

離心泵的技術規范.2類

Technical specifications for centrifugal pumps - Class II

ISO 5302-2003

真空技術.渦輪分子泵.性能特征的測量

Vacuum technology - Turbomolecular pumps - Measurement of performance characteristics

ISO 6145-2-2001

氣體分析 用動態容量法制備標定用混合氣體 第2部分：容量泵

Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 2: Volumetric pumps

ISO 6519-2004

柴油機.噴油泵.軸端和轂盤的錐度

Diesel engines - Fuel injection pumps - Tapers for shaft ends and hubs

ISO 7224-1983

葡萄栽培和葡萄酒釀制設備 搗碎泵 試驗方法

Equipment for vine cultivation and wine making; Mash pumps; Methods of test

ISO 7299-1996

柴油機 噴油泵端面法蘭

Diesel engines - End-mounting flanges for fuel injection pumps

ISO 7440-1-1991

道路車輛 噴油泵試驗臺 第1部分:標準噴油器總成

Road vehicles; fuel injection equipment testing; part 1: calibration nozzle and holder assemblies

ISO 7440-2-1991

道路車輛 噴油泵試驗臺 第2部分:孔板流量測量

Road vehicles; fuel injection equipment testing; part 2 orifice plate flow-measurement

ISO 7876-1 AMD 1-1999

燃油系統 詞匯 第1部分:噴油泵 修改1 兩種語言版

Fuel injection equipment - Vocabulary - Part 1: Fuel injection pump; Amendment 1

ISO 7876-1-1990

燃油系統 詞匯 第1部分:噴油泵 三種語言版

Fuel injection equipment; vocabulary; part 1: fuel injection pumps

ISO 7879-1997

柴油機 柱塞式噴油泵 安裝尺寸

Diesel engines - Cradle-mounted in-line fuel injection pumps - Mounting dimensions

ISO 7886-2-1996

一次性使用無菌皮下注射器 第1部分:帶動力驅動注射泵的注射器

Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps

ISO 7919-5-2005

機械振動.通過旋轉軸的測量評價機械振動.第5部分:水力發電廠和泵站機組

Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 5: Machine sets in hydraulic power generating and pumping plants

ISO 8278-1986

航空航天 液壓式壓力補償變流量泵 一般要求

Aerospace; Hydraulic, pressure compensated, variable delivery pumps; General requirements

ISO 8426-1988

液壓傳動 容積式泵和馬達 空載排量的測定

Hydraulic fluid power; positive displacement pumps and motors; determination of derived capacity

ISO 8849-2003

小艇.電動直流艙底泵

Small craft - Electrically operated direct-current bilge pumps

ISO 8976-2004

夾扭鉗和剪切鉗.水泵鉗.尺寸和試驗值

Pliers and nippers - Multiple slip joint pliers - Dimensions and test values

ISO 9534-1989

道路車輛 燃油泵的電氣連接

Road vehicles; fuel pump electric connections

ISO 9905 Technical Corrigendum 1-2005

離心泵的技術規范.I類.技術勘誤1

Technical specifications for centrifugal pumps - Class I - Technical Corrigendum 1

ISO 9905-1994

離心泵技術條件 Ⅰ類

Technical specifications for centrifugal pumps - Class I

ISO 9906-1999

回轉動力泵 液壓性能驗收試驗 等級1和2

Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1 and 2

ISO 9908-1993

離心泵技術條件 Ⅲ類

Technical specifications for centrifugal pumps; class III

ISO/TR 17766-2005

離心泵運轉用粘性液體.性能修正

Centrifugal pumps handling viscous liquids - Performance corrections